U.S. Department of Commerce Finds Circumvention in Aluminum Container Imports Estimated reading time: 3–4 minutes The United States Department of Commerce has made a preliminary decision regarding aluminum containers from Vietnam. These containers are made using aluminum foil from China. The Department believes these imports are avoiding duties on aluminum containers from China. This decision may affect many imports. Companies and parties interested are encouraged to comment on this preliminary determination. Background and Investigation Timeline The investigation started in July 2025. The Department wanted to know if aluminum containers made in Vietnam with Chinese foil were bypassing trade rules. This came after antidumping and countervailing duty orders were put on similar Chinese products in May 2025. Due to government shutdowns, the investigation faced delays. On January 16, 2026, the deadline for a preliminary decision was moved to April 15, 2026. Scope of the Orders The orders focus on disposable containers, pans, trays, and lids. These products are usually made from flat-rolled aluminum. When these products are made in Vietnam using Chinese foil, they might be avoiding U.S. duties. Preliminary Determination The Department thinks these imports from Vietnam are circumventing duties meant for China. This means duties might apply to these imports in the future. Impact on Importers and Exporters Importers must provide certifications stating their products are not made with Chinese foil. If they can’t prove it, they must follow the rules for imports from China, including paying duties. Certifications must be submitted at the time of entry. Public Comment and Next Steps Interested parties can submit their views and comments on this determination. They must do so within 14 days after the notice is published. There are processes and deadlines for submitting additional information and requesting hearings. Certifications Companies importing products can certify their goods are not affected by these determinations. Both importers and exporters need to keep documentation to prove compliance with these certifications. Conclusion The U.S. Department of Commerce is taking steps to address potential circumvention of duties on aluminum containers. All parties involved in these kinds of imports and exports need to pay close attention to compliance requirements and deadlines. Further actions and adjustments will depend on the final decisions made by the Department after public and industry feedback. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Finds Circumvention of Duties on Aluminum Containers from China Estimated reading time: 5–7 minutes Published: 2026-04-20 The U.S. Department of Commerce has made an important announcement. It found that some products made with aluminum from China are avoiding extra duties. This process is called “circumvention.” The products in question are disposable aluminum containers. These include pans, trays, and lids. They are being made in Thailand using aluminum that comes from China. After that, they are sent to the United States. The aim of this determination is to close any loopholes in the regulations. Commerce wants to ensure that duties on certain products are properly applied. These products are bound by antidumping duty (AD) and countervailing duty (CVD) orders. These are meant to protect U.S. businesses from unfair foreign trade practices. Commerce made a preliminary finding on April 15, 2026. It invited comments from all interested parties. The circumvention inquiry began because of the AD and CVD orders published in May 2025. Commerce began looking into the matter on July 11, 2025. They were checking if products made in Thailand with Chinese materials were avoiding duties. Two companies in Thailand were chosen for this investigation. They are Peak Legends (Thailand) Co., Ltd. and Wohler Household Products (Thailand) Co., Ltd. Due to government shutdowns, the investigation deadlines were extended. This pushed the preliminary determination date to April 15, 2026. The result of this investigation will affect duties. Importers to the United States must now be more careful. They will need to provide certifications to avoid duties. For products from Thailand entering the U.S. since October 28, 2024, importers must complete certifications. These documents show products were not made with Chinese materials. Customs and Border Protection (CBP) will use these certifications to decide if duties apply. If the conditions are not met, duties at high rates may apply. Importers and exporters must keep records of certifications. These include documents like commercial invoices and aluminum mill certificates. They must keep these records for at least five years. Commerce has invited public comments on these certification rules. They also set deadlines for the submission of briefs and hearing requests. This decision by the Department of Commerce underscores the importance of strict trade regulations. The move protects U.S. industries from unfair competition. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Antidumping Duty Review on Cold-Rolled Steel from the UK Rescinded Estimated reading time: 3–5 minutes The U.S. Department of Commerce has made an important decision regarding cold-rolled steel from the United Kingdom. They have decided to rescind, or cancel, the administrative review on antidumping duties for the period from September 1, 2024, to August 31, 2025. Antidumping duties are extra charges on products from other countries that are sold at unfairly low prices in the U.S. This can hurt U.S. companies. The review was supposed to check if the right amount of extra duties was being charged on cold-rolled steel from the UK during the review period. The review was canceled because there were no entries of cold-rolled steel from the UK into the U.S. during that time. Without any entries to review for that period, the U.S. Commerce Department decided there was no need to proceed with the review. This decision means that the current cash deposit rates for cold-rolled steel from the UK will stay the same. Cash deposit rates are the extra money importers pay when bringing goods into the U.S. The Commerce Department will instruct U.S. Customs and Border Protection on how to handle any duties owed. The duties will be equal to the cash deposits made when the goods first arrived in the U.S. For those involved in the case and have access to private information protected under Administrative Protective Order (APO), they must follow certain rules about handling this information. They must either return or destroy this information properly. The decision was officially documented on April 14, 2026, and signed by Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. This information was published in the Federal Register, a daily journal of the United States government, on April 17, 2026. This publication is important for keeping everyone informed and ensuring transparency in government actions. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Commerce Department Finds Subsidies in Russian Phosphate Fertilizers Estimated reading time: 5–10 minutes The U.S. Department of Commerce has announced the final results of an administrative review concerning phosphate fertilizers from the Russian Federation. These fertilizers are produced by Joint Stock Company Apatit (JSC Apatit). The Department found that JSC Apatit received subsidies from the Russian government during 2023. The review covered the period from January 1 to December 31, 2023. This review is part of the Department’s efforts to ensure fair trade practices. The results became applicable on April 17, 2026. The Department determined that JSC Apatit received a subsidy rate of 12.71 percent. This means that JSC Apatit benefitted from financial contributions by the Russian government that are specific to them. As a result, U.S. Customs and Border Protection will assess duties on JSC Apatit’s phosphate fertilizers. The Department extended the deadline for its final results several times due to various delays, including a government shutdown. The final results were completed by April 13, 2026. The Department used specific methods to review the subsidies. It looked into different government programs that might have helped JSC Apatit. The review also considered comments from interested parties. Each subsidy program was examined to ensure that it provided specific financial help to JSC Apatit. The Department used various data prompts to calculate the subsidy amounts. The Department will issue instructions to the U.S. Customs and Border Protection to collect duties on these subsidies. The duties will apply to products entering the U.S. on or after the date of publication of the review. The results of this review highlight the Department’s ongoing work to maintain fair trade by ensuring that foreign companies do not benefit unfairly from government subsidies. These findings are important for U.S. businesses competing in the fertilizer market. The final report includes detailed discussions of issues raised during the review process. This includes the use of facts available and adverse facts available regarding data on file. For more detailed information, parties with interests can refer to the full Issues and Decision Memorandum. This document is accessible online for any registered users. The Department also issued a reminder to parties subject to the Administrative Protective Order about the proper handling of sensitive information. These actions reflect the U.S. Department of Commerce’s commitment to enforcing trade laws and ensuring fair competition in international trade. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Finds Dumping of Korean Fiber Estimated reading time: 3–4 minutes April 17, 2026 The U.S. Department of Commerce has concluded an investigation into imports of low melt polyester staple fiber from the Republic of Korea. This inquiry was focused on the period from August 1, 2023, to July 31, 2024. The findings indicate that Toray Advanced Materials Korea, Inc. (TAK) sold this type of fiber at prices lower than its regular value in the U.S. market. This activity is known as dumping. The department determined that the margin by which the fiber was sold below normal value was 3.02 percent. A margin tells us the extent to which the price was cut. This decision follows a preliminary finding issued in February 2026. During the review process, TAK submitted comments on the initial results. However, the Commerce Department did not make any changes to the final calculations from the preliminary findings. The original investigation into this type of fiber began with an antidumping order in August 2018. This order targets synthetic staple fibers that melt at low temperatures, specifically designed for certain manufacturing uses. The review was delayed due to government shutdowns and document backlogs last year. U.S. Customs and Border Protection (CBP) will assess and apply the appropriate duties to shipments covered by this review. The duties are designed to bring the import prices closer to the usual market values and protect American producers from unfair foreign pricing. The department has also outlined the new cash deposit requirements. These deposits are a form of security for future imports and must be made for all new shipments entering the U.S. They vary depending on whether the producer or exporter was covered in this or previous reviews. Importers are reminded of their responsibility to certify that no antidumping duties have been reimbursed, which could lead to penalty duties if not complied with. This action is part of continued efforts by the U.S. government to enforce fair trade and ensure a level playing field for domestic industries. This notice was signed and dated April 13, 2026, by Christopher Abbott, the Deputy Assistant Secretary for Policy and Negotiations at the Department of Commerce. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Department of Commerce Finds Oman Aluminum Company Sold Sheets at Low Prices Estimated reading time: 2–5 minutes The Department of Commerce has completed a review of the sale of aluminum sheets from the Sultanate of Oman. The review was conducted by the International Trade Administration, a branch of the Department of Commerce. It was found that Oman Aluminium Rolling Company SPC (OARC) sold these products in the United States at prices below the normal value. This review covered the period from April 1, 2023, to March 31, 2024. Summary of Findings The final results are published by the Enforcement and Compliance, International Trade Administration. After a careful review, OARC was determined to have a weighted-average dumping margin of 14.71 percent. This means they were selling the aluminum sheets for much less than they should have been. The review began after preliminary results were published in August 2025. Following this, OARC and other interested parties submitted their comments. Background In November 2025, there was a federal government shutdown that impacted this review. The deadline for the results was delayed several times due to the backlog of documents and additional complications. Additional details about these events can be found in the Issues and Decision Memorandum, a public document available online. Scope of the Review The review pertains to common alloy aluminum sheets from Oman. This product was first subjected to an anti-dumping duty order in April 2021. During the review, it was found that OARC sold the sheets at underpriced rates in the U.S. Changes and Assessment From the preliminary results, certain changes were made to how the dumping margins were calculated. The Department of Commerce has disclosed these calculations. The assessment rates are determined based on detailed rules. If importers have a margin of 0 or less than 0.5 percent, they may not have to pay these additional duties. Next Steps The Department of Commerce will give instructions to U.S. Customs and Border Protection on how to proceed with the assessment of duties. However, if there is an appeal in the U.S. Court of International Trade, action may be delayed further. Cash Deposit Requirements These findings also set the cash deposit rates for future shipments. The new deposit rate for OARC will be the same as the determined dumping margin. For others, the rate from previous reviews will be applied. It emphasizes that these requirements will remain until further changes are made. Important Notices Importers are reminded of their responsibility to file the certificate regarding reimbursement before liquidating entries. The Department of Commerce warns that non-compliance may result in doubled duties. Conclusion This notice marks an important find in the ongoing efforts to ensure fair trade practices. The Department of Commerce remains vigilant in upholding trade laws and ensuring fair market value for imported goods. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Finds Dumping of Aluminum Sheet from Taiwan Estimated reading time: 2–5 minutes Date: 2026-04-16 The U.S. Department of Commerce announced the results of a review about aluminum sheets coming from Taiwan. They found that a company sold aluminum sheets at prices lower than usual during 2023 and 2024. Important Dates The findings are effective from April 16, 2026. Background In August 2025, the Department asked for opinions on the matter. There were delays due to a government shutdown and technical issues. Because of these reasons, the final results were delayed until April 16, 2026. Scope of the Review The review looked at common alloy aluminum sheets from Taiwan to see if they were priced too low. Findings The review showed that C.S. Aluminium Corporation, a producer from Taiwan, had a dumping margin of 0.71 percent. Next Steps The Commerce Department will work with the U.S. Customs and Border Protection to apply duties on the aluminum sheets. These duties are based on how much the products were underpriced. Cash Deposit Requirements For future imports, a cash deposit based on these findings will be needed. If there is no specific rate for a company, a default rate of 17.50 percent will apply. Notification to Importers Importers need to follow rules about reimbursing antidumping duties to avoid penalties. End Note These results are official as of April 16, 2026, by the Department of Commerce, ensuring fair trade practices. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Issues Final Results on Antidumping Duties for Chinese Mobile Access Equipment Estimated reading time: 3–5 minutes The U.S. Department of Commerce has issued its final results in the review of antidumping duties on certain mobile access equipment and parts from China. This review focused on sales made from April 1, 2023, to March 31, 2024, and involved Zhejiang Dingli Machinery Co., Ltd. (Dingli). Commerce found that Dingli sold these products in the U.S. at prices below their normal value during this time period. This finding means that Dingli will continue to face duties when exporting these specific products to the United States. The final results of the review, published on April 16, 2026, indicate a dumping margin of 18.27 percent for Dingli. Other companies such as Hunan Sinoboom Intelligent Equipment Co., Ltd., Terex (Changzhou) Machinery Co., Ltd., and Oshkosh JLG (Tianjin) Equipment Technology Co., Ltd. were also reviewed and given the same margin rate. These results come after the preliminary findings reported on August 8, 2025, which underwent several deadline extensions due to a government shutdown and backlog issues. The Commerce Department conducted this review following the processes outlined in the Tariff Act of 1930 and used data drawn from various submissions during the review period to make its calculations. CBP will assess duties based on these final results. Importers will have to pay cash deposits at the rates determined in this review when these goods enter the U.S. This measure aims to ensure fair trade and level the playing field for U.S. industries. The products affected by this measure are manufactured in China. The Department has made detailed changes since the preliminary review, and these are recorded in official documents available through designated online government platforms. These findings are part of ongoing efforts to enforce trade laws and protect domestic companies from unfair competition due to dumping. The declarations made are a reminder to importers of the importance of compliance with trade regulations to avoid financial penalties. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Concludes Review on Non-Oriented Electrical Steel from China and Taiwan Estimated reading time: 3–5 minutes The U.S. Department of Commerce has completed its review of the countervailing duty orders on non-oriented electrical steel (NOES) from China and Taiwan. These orders were first published on December 3, 2014, as a means to address the unfair subsidization of these products by the governments of China and Taiwan. According to the Department, removing these countervailing duties could lead to continued or renewed subsidies. This could potentially harm the U.S. industry that produces similar products. Therefore, the Department has decided to maintain the duties. The countervailing duties for Chinese producers, such as Baoshan Iron & Steel Co., Ltd., are set at 158.88%. The same rate applies to all other producers from China under the “all others” category. For Taiwanese producers, the company Leicong Industrial Company, Ltd. faces a countervailing duty rate of 17.12%. Other producers from Taiwan are subjected to a reduced rate of 8.61%. The review process began on December 1, 2025, when the Department announced its intention to examine the necessity of the orders. The process included adequate responses from domestic parties, such as Cleveland-Cliffs Inc. and the United States Steel Corporation. However, no substantive responses were received from the governments of China and Taiwan or any respondent parties. Due to government shutdowns and subsequent procedural delays, the deadline for these final results was extended to April 14, 2026. This notice also reminds parties involved of their obligation to manage administrative protective orders. Such measures ensure the protection of confidential information during trade investigations. For more details or to access the full report, interested parties can visit the Government Publishing Office’s website or use the Antidumping and Countervailing Duty Centralized Electronic Service System. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Commerce Department Keeps Antidumping Duties on Electrical Steel Estimated reading time: 3–5 minutes The U.S. Department of Commerce made an important announcement. They have decided to continue duties on a special kind of steel called Non-Oriented Electrical Steel (NOES). This steel comes from countries like Sweden, Germany, China, Korea, Taiwan, and Japan. The Commerce Department wants to stop unfair pricing, also known as “dumping.” Why Are There Duties? In 2014, the U.S. put these duties in place. This was to stop other countries from selling their steel at very cheap prices in the U.S. These low prices harm U.S. businesses. Now, after reviewing the situation, the Commerce Department believes lifting these duties would result in more dumping. What Did the Review Find? The review, also known as a “sunset review,” started in December 2025. It looked at whether stopping the duties would lead to more unfair pricing. The review found that the unfair pricing, or dumping, would likely continue without these duties. For example, the review found dumping margins range from 6.88% in Korea to as high as 407.52% in China. Who Is Involved? Two major companies, Cleveland-Cliffs Inc. and United States Steel Corporation, showed interest in this review. Both are big U.S. steel producers. They want to keep the duties in place to protect their businesses. How Does This Affect International Trade? The Commerce Department’s decision means these duties will stay. This helps keep the playing field fair between U.S. and foreign steel producers. It also means that the U.S. wants to keep supporting its own steel industry. What’s Next? The decision was signed on April 14, 2026. Now, parties that use this steel must continue following the duties. The Commerce Department says these actions are in line with laws that ensure fair international trade. This careful decision aims to protect U.S. industries and workers from practices that could harm them. By keeping these duties, the Commerce Department shows its commitment to fair trade. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

New Antidumping Duty Orders Issued on Silicon Metal Imports from Angola and Laos Estimated reading time: 3–5 minutes The U.S. Department of Commerce has announced new antidumping duty orders on silicon metal imports from Angola and the Lao People’s Democratic Republic (Laos). These measures are set to apply starting April 16, 2026. The antidumping duty orders follow investigations by the U.S. Department of Commerce and the U.S. International Trade Commission (ITC). Both bodies concluded that silicon metal from these countries is being sold in the U.S. at less than fair value. This practice is harmful to U.S. industries. The investigations found that imports from Angola and Laos have injured U.S. industries. This finding is based on sections 735(b)(1)(A)(i) and 735(d) of the Tariff Act of 1930. The Department of Commerce published its final determination on February 23, 2026. The ITC concluded its final determination on April 6, 2026. The silicon metal covered by these orders contains at least 85% but less than 99.99% silicon. It also has less than 4% iron by weight. Semiconductor grade silicon with 99.99% or more silicon is excluded from these orders. The U.S. Customs and Border Protection will now assess duties on these imports from Angola and Laos. These duties are based on the difference between the normal value of the silicon metal and its export price. Suspension of liquidation and cash deposit requirements will resume with the ITC’s final injury determination. Importers will need to submit cash deposits when bringing in silicon metal from these countries. Angola’s PC Silicon Co. Limited and Wanhongda International Limited are affected. They have a dumping margin of 68.45%. In Laos, Lao Silicon Co., Ltd has a dumping margin of 94.44%. The duty order includes an annual inquiry service list, which interested parties can join. This list will help them with future inquiries or applications related to these orders. These actions are part of efforts to protect U.S. industries from unfair trade practices. They ensure that all imported goods compete fairly in the U.S. market. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Issues Duty Order on Silicon Metal from Laos Estimated reading time: 3–5 minutes The United States government has issued a countervailing duty order on silicon metal. This order comes from the Lao People’s Democratic Republic (Laos). The U.S. Department of Commerce made an affirmative final determination. It found that subsidies are being provided to producers and exporters of silicon metal from Laos. On April 6, 2026, the U.S. International Trade Commission (ITC) confirmed this decision. It said the U.S. industry is being hurt by these imports. The order is effective from April 16, 2026. The duty order covers all forms of silicon metal. This includes silicon metal powder. The metal in question must contain at least 85.00 percent but less than 99.99 percent silicon by actual weight. However, silicon used in semiconductors is excluded. This specific type of silicon has at least 99.99 percent silicon by actual weight. The U.S. will now assess countervailing duties. This applies to entries from Laos entered or taken from warehouses for consumption. This covers imports on or after September 26, 2025. Lao Silicon Co., Ltd. has a subsidy rate of 69.10 percent. The same rate applies to all other producers or exporters from Laos. The Department of Commerce will instruct U.S. Customs and Border Protection to suspend liquidation of these imports. This action aims to protect the U.S. industry from unfair competition. It also applies cash deposit requirements on incoming silicon metal shipments described in the order. Finally, the order will be in effect until the review for the following year. The new list for service and inquiry will be updated annually. The Department of Commerce issues this order following the proper procedures under the Tariff Act of 1930. The government continues to enforce measures to support fair trade practices. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Commerce Department Announces Final Results for Antidumping Review of Steel Plates from Korea Estimated reading time: 3–5 minutes The U.S. Department of Commerce’s International Trade Administration has released the final results of its review on antidumping duties concerning certain carbon and alloy steel cut-to-length plates from the Republic of Korea. This decision was announced on April 16, 2026, and applies to the period of May 1, 2023, through April 30, 2024. The department found that the group of companies, referred to as the POSCO single entity—which includes POSCO, POSCO International Corporation, POSCO Mobility Solution, Taechang Steel Co., Ltd., and Winsteel Co., Ltd.—did not sell the steel plates at prices lower than the normal value during the reviewed period. This conclusion means that these companies will not face additional antidumping duties on their products shipped to the United States for the specified review period. The review began with preliminary results published on September 11, 2025. During the review, only the POSCO single entity, the mandatory respondent, submitted comments. Despite some delays in the administrative process due to a federal government shutdown, the final determination was completed without altering the initial findings. The Commerce Department’s decisions, including the confirmation of zero percent dumping margins for the POSCO single entity, mean that no additional fees will be levied on their steel plate exports. Commerce has outlined how U.S. Customs and Border Protection will proceed with assessments for the subject merchandise. This includes instructions for all the entries during the review period, including those involving intermediaries unaware that the steel was destined for the U.S. Final cash deposit requirements have also been set. These rules are essential for all future shipments of the steel plates from Korea entering the U.S. All cash deposits for subject merchandise will continue under guidelines that offer clarity on rates for companies outside the current review but covered in earlier segments of the proceedings. The department has issued a reminder to importers about their responsibilities to file certificates regarding the reimbursement of duties. This action is to ensure that Commerce doesn’t presume the occurrence of reimbursements, which could lead to doubled duties. Overall, the Commerce Department’s findings reflect thorough administrative processes. The results demonstrate compliance with international trade laws, ensuring fair trade practices between the U.S. and Korea in the steel industry. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Finds Aluminum Foil from China Sold at Cheaper Prices Estimated reading time: 1–3 minutes The U.S. Department of Commerce recently published its final findings for an investigation on some aluminum foil products imported from China. The investigation looked at the sale of these products from April 1, 2023, to March 31, 2024. The results showed that certain Chinese producers and sellers sold the aluminum foil at prices lower than what is considered normal. This is known as selling at “less than normal value.” The Department of Commerce, which works on issues like international trade, carried out this review. They released the preliminary findings last year in August and gave people time to comment. However, the process faced delays due to government shutdowns and document backlogs. These final results were released on April 16, 2026. In the investigation, some changes were made to the calculations for certain companies from China. The companies involved are Jiangsu Dingsheng New Materials Joint-Stock Co., Zhejiang Dingsheng, and Zhongji, among others. The review made sure to check if these companies could prove they should be treated separately from the rest of their country. This is important because it affects the rates of duties they must pay. Five companies succeeded in showing they should get separate rates. However, other companies will be treated as part of the bigger China-wide entity and face a higher duty rate of 105.80 percent. The next steps are for the U.S. Customs and Border Protection to collect duties, based on these findings. The Department of Commerce will tell them how much to charge within 35 days, unless some legal actions change this plan. For companies that worked to get separate treatment, the new duty rates will apply for any aluminum foil they bring into the U.S. Extra rules will apply for companies without their own rates, and they will continue to use either the China-wide rate or other existing rates, depending on their situation. Anyone bringing these products into the U.S. must remember their responsibilities, like filing the right forms about duties. If they don’t, they might have to pay twice the regular amount. This decision comes after careful checking and reviewing the facts. The goal is to ensure fair trade practices between countries. The new rules start immediately and will continue until further updates from the Department of Commerce. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Department of Commerce Announces Antidumping Review on Mattresses from Malaysia Estimated reading time: 3–5 minutes The U.S. Department of Commerce has preliminarily found that several companies sold mattresses from Malaysia at prices below normal value from May 1, 2024, through April 30, 2025. As a result, the Department is partially rescinding its review of certain companies which had no entries of the merchandise during the period under review. The announcement came in a notice published in the Federal Register on April 15, 2026. The Department is inviting interested parties to comment on the preliminary findings. Background of the Review The Department of Commerce initiated the antidumping duty order on mattresses from Malaysia on May 14, 2021. On May 5, 2025, it announced a chance to request an administrative review. In June 2025, the petitioners requested a review for 19 companies. Respondent Selection and Examination The Department selected several companies, including CS Vision Supply SDN BHD and Premier High Ventures, for mandatory examination. However, these companies, along with others like Pinnacle Salute SDN BHD and Weld Tack Industries, did not respond timely to the Department’s requests for information. Partial Rescission of Review For eight companies with no entries of merchandise during the period, the Department will rescind the administrative review. These companies are APM Auto Parts Marketing, Comfort Coil Technology SDN BHD, Delandis Furniture (M) SDN BHD, Ever Want (M) SDN BHD, Far East Foam, Industries SDN BHD, GGC Global, Irama Furniture SDN BHD, and Vision Foam Ind. SDN BHD. Application of Adverse Facts Available The Department will use adverse facts available to assign estimated dumping margins to companies that were uncooperative, such as CS Vision and others. These companies will face a rate of 42.92 percent, which is consistent with rates applied in previous segments of this proceeding. Comments and Further Actions Interested parties can submit comments within 21 days of the notice’s publication. The Department of Commerce plans to publish the final results within 120 days, determining the final duties on the mattresses. Future Instructions Upon final results, the Department will instruct Customs and Border Protection on assessment rates for the concerned companies. The cash deposit rate will remain effective until further notice. The Department emphasizes the importance for importers to comply with the requirement to file a certificate regarding the reimbursement of antidumping duties before the liquidation of entries during the review period. This announcement by the Department of Commerce marks a critical step in enforcing trade regulations and ensuring fair competition in the international mattress market. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Federal Register Notice: Preliminary Results of Countervailing Duty Review on Aluminum Extrusions from China Estimated reading time: 3–5 minutes Department Announces Preliminary Results The U.S. Department of Commerce, through its International Trade Administration, has announced the preliminary results of the Countervailing Duty (CVD) Administrative Review on Aluminum Extrusions from the People’s Republic of China. This notice was published under Federal Register Volume 91, Number 72, on April 15, 2026. Scope of the Review The review looked into whether some Chinese manufacturers and exporters of aluminum extrusions received illegal government subsidies during the period from January 1, 2024, to December 31, 2024. Partial Rescission Commerce has rescinded this review in part. Specifically, the administrative review was withdrawn for 79 companies. This was at the request of the petitioner, the Aluminum Extrusions Fair Trade Committee. Additionally, there was no review performed on 12 companies as there were no customs entries during the review period. Methodology The review was conducted under section 751(a)(1)(A) of the Tariff Act of 1930. Six companies were found to not respond to the requests and were given a countervailable subsidy rate based on data, implying adverse inferences. Preliminary Results The preliminary finding imposed a subsidy rate of 164.29 percent ad valorem for the following six companies: Anji Chang Hong Chain Manufacturing, Assa Abloy (Zhongshan) Security Technology, Dezhou Huoamei Windows and Doors, Ewellix Motion Technologies, Ningbo Lianda Winch, and Shanghai Zesheng Automotive Technology. Public Comment and Hearing Stakeholders are invited to submit comments. Case briefs should be filed within 21 days of this notice, and rebuttal briefs within five days after case briefs. An executive summary for each issue should be included in briefs. Hearing requests must be submitted within 30 days. Next Steps The Commerce Department plans to issue the final results within 120 days of these preliminary results. The department will also notify the U.S. Customs and Border Protection (CBP) for assessment rates and cash deposit instructions. Conclusion This announcement marks an important stage in the enforcement of trade laws concerning aluminum extrusions from China. It demonstrates ongoing efforts by the U.S. Department of Commerce to ensure fair trade practices. The results remain subject to change pending final assessment. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Commerce Department’s Review of Antidumping Duties on Chinese Citric Acid Stays In Place Estimated reading time: 3–5 minutes The U.S. Department of Commerce has made an important decision regarding citric acid from China. The department found that ending the antidumping duty order on citric acid and citrate salts from China could lead to dumping again. Dumping is when products are sold in another country at unfairly low prices. This decision is part of an important process called the “Expedited Third Sunset Review.” Background Information Back in 2009, the U.S. started putting extra charges on citric acid and some citrate salts from China. They did this to stop dumping. Every five years, they review to see if these charges are still needed. This is now the third time they are doing this review. On December 1, 2025, they started the review process. Some American companies like Archer-Daniels-Midland Company and Cargill, Inc. told Commerce they want the charges to stay. These companies make the same products and were worried that ending the duties could hurt them. Review Process The review followed set rules. The American companies told the department why they believed the duties should stay. They sent a detailed response on December 22, 2025. Nobody from China’s side gave a formal response to the review. Because of this, the Commerce Department had no need to do a longer review and instead did a quicker 120-day review. This was due to a lack of responses from China. Due to some delays, including a government shutdown, they finished their final review on April 14, 2026. What This Means The department decided that if the duties were removed, dumping could start again. They believe the Chinese companies would likely go back to selling citric acid at unfairly low prices in the U.S. They also decided that the dumping margin could be as high as 156.87 percent. This decision means that the current additional charges on citric acid from China will stay in place. This helps protect American companies who make similar products. Closing Notes The U.S. Department of Commerce is committed to making sure trade rules are fair. This decision is important for keeping a fair market for citric acid producers in the U.S. The decision shows dedication to preventing unfair trade practices from happening again. Acting Deputy Assistant Secretary Scot Fullerton signed the final decision on April 10, 2026. The ultimate goal is to ensure American companies can compete on a level playing field. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Maintains Antidumping Duties on Frozen Fish Fillets from Vietnam Estimated reading time: 2–5 minutes April 15, 2026 The U.S. Department of Commerce has announced its final decision regarding certain frozen fish fillets imported from the Socialist Republic of Vietnam. They have decided not to remove the antidumping duties currently in place. What This Decision Means Antidumping duties are in place to prevent products from other countries being sold at unfairly low prices, which can hurt U.S. businesses. The Department of Commerce has determined that removing these duties could lead to more dumping of fish fillets by Vietnam. This means they believe Vietnam might continue to sell fish fillets at very low prices in the United States, making it hard for U.S. companies to compete. Background of the Decision The Department first set these duties in August 2003. Every five years, they review if these duties are still needed. This is known as a “sunset review.” The recent review began on December 1, 2025. The Catfish Farmers of America, as well as some individual U.S. catfish processors and producers, showed interest in keeping these duties. They believe these duties help protect their businesses from unfair pricing by Vietnamese exporters. The Review Process The Department of Commerce received feedback from U.S. catfish farmers, processors, and producers, showing their support to keep the duties. They said they are important to ensure fair competition. However, the Vietnamese companies did not respond with any comments. As a result, the review was done quickly, and the decision was made within 120 days. Future Steps The decision means that the U.S. will continue to have duties of up to 63.88% on certain frozen fish fillets from Vietnam. This helps protect U.S. companies from the negative effects of dumping. Any parties involved must follow the rules about confidentiality and the use of information. The details are governed by the Antidumping and Countervailing Duty laws. Conclusion The Department of Commerce’s decision shows their commitment to ensuring fair trade practices. The duties aim to support U.S. businesses and maintain competitive market conditions. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Confirms Continuation of Subsidies on Oil Country Tubular Goods from China Estimated reading time: 2–4 minutes Date: 2026-04-15 The U.S. Department of Commerce has announced the final results of its expedited third sunset review of the countervailing duty order on oil country tubular goods (OCTG) from the People’s Republic of China. This review, which is part of a regular five-year cycle, evaluates whether removing the duty order would likely lead to the continuation or recurrence of subsidies. According to the Department of Commerce, if the countervailing duty order were revoked, it is likely that countervailable subsidies would continue or reoccur. This means that Chinese companies might still be receiving unfair financial support from their government, which could harm U.S. businesses. The product in question, OCTG, is essential for the oil and gas industry. It includes pipes used to drill and transport oil and gas from wells. The sunset review began on December 1, 2025. United States Steel Tubular Products and the U.S. OCTG Manufacturers Association, representing domestic interests, showed intent to participate in the review. They provided responses supporting the continuation of the duty order. During the review, the Department of Commerce received no adequate responses from China or any Chinese companies. As a result, they decided to conduct an expedited 120-day review. The Department of Commerce’s findings specify net countervailable subsidy rates that range from 20.90% to 26.19% for various Chinese producers and exporters. These include companies like Jiangsu Changbao Steel Tube Co., Tianjin Pipe (Group) Co., and Zhejiang Jianli Enterprise Co. Ltd. Finally, the Department of Commerce will continue to enforce the countervailing duty order to help maintain fair competition within the U.S. market. They stress the importance of companies understanding their responsibilities concerning any shared private information during this process. This decision aims to protect American jobs and ensure that U.S. companies can compete fairly with international businesses. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Confirms Continued Duties on Citric Acid from China Estimated reading time: 3–5 minutes The U.S. Department of Commerce has announced the final results of its third sunset review of the countervailing duty (CVD) order on citric acid and certain citrate salts from the People’s Republic of China. The findings indicate that revoking the CVD order would likely lead to the continuation or recurrence of countervailable subsidies. This decision was announced on April 15, 2026, and is effective immediately. Background Information The countervailing duty order on citric acid from China was first published by the Commerce Department on May 29, 2009. Under U.S. trade laws, these orders are subject to sunset reviews every five years to assess their continued necessity. The third sunset review began on December 1, 2025. Archer-Daniels-Midland Company, Cargill, Incorporated, and Primary Products Ingredients Americas LLC, as domestic interested parties, participated in the review. These companies claimed interested party status because they manufacture, produce, or wholesale the domestic like product in the United States. Process and Findings The review was expedited, taking 120 days to complete. Commerce did not receive a substantive response from the Government of China or any respondent interested party. As a result, the U.S. International Trade Commission was notified, and the expedited review proceeded. The department found that revoking the order would likely lead to a continuation or recurrence of subsidies with the following net countervailable subsidy rates: TTCA Co., Ltd. (also known as Shandong TTCA Biochemistry Co., Ltd.): 60.07% Yixing Union Biochemical Co., Ltd., and Yixing Union Cogeneration Co., Ltd.: 52.22% Anhui BBCA Biochemical Co., Ltd.: 166.34% All other producers/exporters: 55.53% Scope and Impact The order covers citric acid and citrate salts from China. This decision plays a crucial role in maintaining fair competition in the U.S. market by addressing unfair subsidies received by Chinese exporters. Next Steps The Department of Commerce will continue with the countervailing duties on the specified Chinese products. This notice also serves as a reminder for parties under an Administrative Protective Order to handle proprietary information accordingly. This decision aligns with the department’s commitment to ensuring fair trade practices and protecting U.S. industries from unfair foreign competition. The Department of Commerce is responsible for enforcing compliance with trade agreements and conducting duties like these sunset reviews. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Reviews Countervailing Duty on Indian Steel Fittings Estimated reading time: 3–5 minutes The U.S. Department of Commerce recently reviewed a duty order on forged steel fittings from India. This was part of their first “sunset review,” which checks if certain duties should continue. The findings showed that if this duty is canceled, it may lead to more unfair subsidies. The duty order began on December 11, 2020. The review started on December 1, 2025. This is as per U.S. trade laws. The review was to see if stopping the duty would cause harm to U.S. industries. U.S. companies like Bonney Forge Corporation participated in the review. They have a strong interest as they make similar products in the U.S. Unions involved in the production also took part in the review. Only the U.S. side gave detailed feedback during this review. There was little response from India or other companies interested in this case. Due to this, the review was completed quickly, in 120 days. There were delays in the process because of a government shutdown. This caused all deadlines to be pushed back. The final results were finally published on April 14, 2026. The main product involved here is called forged steel fittings. These are small parts used in things like plumbing and pipelines. The review found that Indian companies, like Shakti Forge, might continue to get unfair help from their government. They found a subsidy rate of up to 300.77% for some companies. This review helps decide if U.S. industries are competing fairly. These results will guide what happens next with duties on these products. The Commerce Department’s decision and related documents are available online. These give a full picture of why this decision was made. The full results can be found on the Department’s website for those who want more details. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Maintains Antidumping Duties on Forged Steel Fluid End Blocks Estimated reading time: 3–5 minutes Background The U.S. Department of Commerce has decided to continue applying antidumping duties on forged steel fluid end blocks from Germany and Italy. This decision follows an expedited first sunset review. The department found that if these duties were removed, it would likely lead to further instances of dumping, where products are sold at unfairly low prices in the United States. These duties were first set on January 29, 2021. The reviews started on December 1, 2025, as explained in a Commerce notice. This review process is part of the Tariff Act of 1930, section 751(c), which requires these evaluations every five years to determine if duties should continue. Review Process On December 11, 2025, domestic parties who support these duties submitted their intent to participate. They represent U.S. producers of these steel blocks. The Department of Commerce followed this with a notification to the U.S. International Trade Commission (ITC) on December 23, 2025, confirming receipt of participation notices. By December 22, 2025, these parties also provided detailed responses supporting why the duties should remain. The department did not receive any such responses from the opposing parties, which could mean those from Germany and Italy did not contest against these duties. Expected Dumping Margins The review, led by Acting Deputy Assistant Secretary Scot Fullerton, concluded that removing the duties would likely allow dumping to continue. The expected dumping margins could be as high as 78.36% for German products and 58.48% for Italian products. Impact of Decision This decision is an important measure to protect U.S. industries from unfair pricing practices. By keeping these duties, the department aims to support fair competition and aid domestic producers. Conclusion The U.S. Department of Commerce will keep the antidumping duties. This decision helps prevent future dumping of forged steel fluid end blocks from Germany and Italy. The full explanation and details can be found in the Issues and Decision Memorandum on the department’s website. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Review on Forged Steel Fittings from India and Korea Estimated reading time: 4–8 minutes The U.S. Department of Commerce has made important findings about forged steel fittings from India and the Republic of Korea. These findings come from a detailed review regarding the antidumping duties placed on these products. The Department of Commerce looked at past orders issued on December 11, 2020, which applied duties to these steel fittings. These duties were put in place to prevent unfair pricing and competition in the United States. Commerce began a new review on December 1, 2025, to see if these duties should continue. This review is called a “sunset review,” and it follows the rules of the Tariff Act of 1930. Several companies and a union in the U.S. have shown interest in keeping these duties. These groups included Bonney Forge Corporation, Phoenix Forging Company/Capital Manufacturing Company, LLC, and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union. They argued that taking away these duties would lead to unfair pricing again. Commerce decided to conduct an “expedited” review. This involves a quicker process that takes 120 days. They made this decision because no other countries or companies provided enough information to argue against the duties. During the review, some deadlines were affected by a government shutdown in November. The deadlines were extended twice, once by 47 days and then by 21 days, to ensure that everything was reviewed properly. The review confirmed that if the duties were not continued, dumping would likely continue or happen again. Commerce found high dumping margins of up to 293.40% for India and 198.38% for Korea. This decision also reminded businesses involved to handle sensitive information carefully, following specific rules. The U.S. Department of Commerce has published these findings officially. They are working to ensure fair trade practices continue by keeping these antidumping duties in place. This decision aims to support U.S. manufacturers and workers by preventing unfair competition from foreign companies that might sell products at artificially low prices. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Releases Final Results on Forged Steel Fluid End Blocks Review Estimated reading time: 3–5 minutes The U.S. Department of Commerce (Commerce) has announced the final results of its first sunset review of the countervailing duty (CVD) orders on forged steel fluid end blocks. These reviews involve imports from the People’s Republic of China (China), the Federal Republic of Germany (Germany), India, and Italy. The purpose of the review was to determine if removing the current duties would lead to the continuation or recurrence of countervailable subsidies. Background The CVD orders were first published on January 29, 2021. These orders were established to protect U.S. industries from unfair subsidies on forged steel fluid end blocks from the mentioned countries. On December 1, 2025, Commerce began the process of reviewing these orders to decide their future. On December 11, 2025, the Coalition for Fair Trade in Forged Steel Fluid End Blocks expressed its intention to participate in the review. This group includes American producers like Ellwood City Forge Company and A. Finkl & Sons. They represent a majority of U.S. manufacturers of these fluid end blocks. For the review, Commerce had a 30-day deadline to receive responses from interested parties. However, they did not receive any substantive responses from the countries involved or any other interested parties. Review Process Due to a backlog of documents from a federal government shutdown, the deadlines for administrative proceedings were extended by 21 days. The deadline for the final results was eventually set for April 14, 2026. Scope of the Orders The orders under review specifically address forged steel fluid end blocks. These are important parts used in machinery and equipment within various industries. Final Results of the Review Commerce found that if the current orders are lifted, countervailable subsidies at previous rates are likely to continue or recur. Here are the subsidy rates that are likely to prevail if the orders are revoked: For China, rates range from 16.80% to 337.07%, depending on the exporter or producer. For Germany, the rates range from 7.10% to 14.74%. For India, Bharat Forge Limited and others would maintain a rate of 5.92%. For Italy, companies would see rates from 13.40% to 44.86%, based on the specific company. Conclusion These results underline the importance of maintaining the current protections for U.S. industries against subsidies from China, Germany, India, and Italy. The findings ensure that U.S. industries can compete fairly in the market. The decision reflects Commerce’s commitment to enforcing trade laws and protecting American manufacturing sectors. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Confirms Continuation of Anti-Dumping Duties on Chinese Oil Country Tubular Goods Estimated reading time: 3–5 minutes The U.S. Department of Commerce has announced the final results of its expedited third sunset review concerning certain oil country tubular goods (OCTG) imported from the People’s Republic of China. The Commerce Department has decided that revoking the existing antidumping duty order on these goods would likely lead to the continuation or recurrence of dumping in the United States. This decision is important because dumping refers to selling goods in a foreign market at less than their fair value, which can harm the domestic industry. The initial antidumping duty order was issued on May 21, 2010. Commerce conducted this sunset review as mandated by the Tariff Act of 1930, which requires periodic reviews of such orders to determine if they should be continued or revoked. The review process began on November 3, 2025. Notices of intent to participate in the review were submitted by domestic interested parties, including United States Steel Tubular Products, Inc. and the U.S. OCTG Manufacturers Association, in December 2025. The domestic parties argued that revoking the order would hurt U.S. producers of oil country tubular goods. The Commerce Department found merit in these arguments because no substantive response was received from the respondent parties, which are usually foreign producers or exporters. Due to a delay caused by a lapse in federal government appropriations, the deadline for these final results was extended. This has been adjusted and now finalized as of April 14, 2026. The specific scope of the order includes certain tubular goods used in oil drilling processes, imported from China. The review determined a high likelihood of continued dumping, with potential margins of up to 99.14 percent, which are very significant. This suggests that without the anti-dumping duties, Chinese products could considerably undercut domestic prices, negatively affecting U.S. manufacturers. Commerce will continue to enforce its decision as per regulatory guidelines. This notice also reminds parties under an Administrative Protective Order to adhere to procedures regarding proprietary information, ensuring its protection or removal in compliance with federal regulations. The final decision reflects the Department’s ongoing effort to protect U.S. industries from unfair trade practices, using legal frameworks established for international trade compliance. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Concludes Antidumping Review for PET Film from Taiwan Estimated reading time: 4–6 minutes The U.S. Department of Commerce (Commerce) has announced the final results of its antidumping duty administrative review concerning polyethylene terephthalate film, sheet, and strip (PET film) from Taiwan. The period of review (POR) for this investigation was from July 1, 2023, through June 30, 2024. The department has determined that these products were sold in the United States at less than normal value. Background of the Investigation Commerce initially published the Preliminary Results on October 3, 2025, and invited interested parties to comment. Due to unforeseen events like the Federal Government shutdown, which caused a delay in proceedings, Commerce extended its deadlines. The final results were due on April 7, 2026. The review was based on the period specified, examining entries of PET film from Taiwan. Commerce reviewed comments and documents submitted by interested parties before reaching its final decisions. Final Decisions and Rescission of Review Commerce decided to rescind part of its review regarding entries from Shinkong Materials Technology Corporation and Shinkong Synthetic Fiber Corporation. The review found no entries of PET film from these entities during the POR for which duties could be assessed. Therefore, as there were no entries, the review was partially rescinded in accordance with the law. Final Results of the Review Commerce has concluded that Nan Ya Plastics Corporation, a producer/exporter, sold PET film in the U.S. at a weighted-average dumping margin of 1.06 percent. Commerce will now calculate and apply antidumping duties on the entries of subject merchandise based on these findings. Details for Importers Importers need to act in accordance with Commerce’s decision to file appropriate certificates regarding the reimbursement of antidumping duties. Failure to comply may result in double antidumping duties being assessed. Cash Deposit and Assessment Rates Following this notice’s publication, new cash deposit requirements will apply to shipments of PET film from Taiwan entered into the U.S. The cash deposit rate for companies covered by this review will reflect the final dumping margin. For companies not covered, the previous rates from completed segments will remain in effect. Commerce will provide detailed instructions to the U.S. Customs and Border Protection for the assessment of duties. These instructions will be sent no earlier than 35 days after this notice’s publication to provide parties an opportunity to seek an injunction if necessary. This announcement completes the administrative review in accordance with U.S. trade law, solidifying the process by which the U.S. monitors and enforces fair trade practices regarding imported goods. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Department of Commerce Finds Low-Value Sales of MDI from China Estimated reading time: 4–7 minutes The U.S. Department of Commerce has made a final decision about a chemical called methylene diphenyl diisocyanate (MDI) from China. They found that it is likely being sold in the United States for less than it is worth. This decision covers sales between July 1, 2024, and December 31, 2024. The decision was announced on April 13, 2026. The Department of Commerce checked sales records from China to see if the prices were fair. They found that the prices were not fair and were lower than the usual value. This is called “less than fair value” (LTFV) pricing. Earlier, the Department had found some early results and shared them with the public. They allowed people to give their comments on the findings but did not make any changes based on those comments. The scope of this investigation included looking at the specific type of MDI from China to determine if it was being sold at lower prices. No arguments were made that changed their initial expectations. Verification showed that the main company from China, involved in these sales, did not meet the necessary requirements for a separate rate. As a result, this company is grouped with a larger China-wide entity that does not get special treatment. The Department of Commerce decided not to verify the company’s records because they were not helping enough in the investigation. Certain companies were given separate rates because they met all the necessary conditions. These companies include Covestro Polymers (China) Co., Ltd. and Shandong Mingko Co., Ltd. They both received a weighted-average dumping margin of 85.11 percent. For companies that did not cooperate or did not qualify for separate rates, like the China-wide entity, the dumping margin is set at 159.04 percent. This means that their sales are found to be significantly below fair value. The International Trade Commission (ITC) will now decide if the low prices of MDI from China hurt U.S. companies. If they agree, the U.S. will put taxes on MDI from China to make import prices fairer. This is called an antidumping duty order. If the ITC does not think U.S. companies are hurt, there will be no extra taxes, and the case will be closed. The Department of Commerce will continue to keep a close watch on sales records and prices for fairness in international trade. They will work to make sure U.S. businesses are not harmed by unfair pricing from other countries. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

U.S. Commerce Department Reviews Antidumping Duties on Spanish Steel Products Estimated reading time: 3–5 minutes Key Findings The review found TYCSA made sales below normal value. This means TYCSA sold its products in the United States for less than they would sell them at home in Spain. The weighted-average dumping margin for TYCSA was determined to be 11.32%. Background The process for determining these dumping margins began with preliminary results published on October 3, 2025. Some parties involved submitted their opinions on these initial findings. TYCSA submitted their comments on November 3, 2025, with additional responses from U.S. companies on December 29, 2025. Due to a federal government shutdown in late 2025, the process took longer than expected. Deadlines were extended to allow for the shutdown and a backlog in filing. The new deadline for the final results was set for April 7, 2026. Scope and Procedures The affected products are specifically prestressed concrete steel wire strand from Spain. The products have been under review since an order was issued on June 4, 2021, which was part of a broader case concerning similar products from other countries. Next Steps Commerce plans to disclose its calculations to interested parties soon. They will also instruct Customs and Border Protection (CBP) on how to assess or refund antidumping duties for the affected entries. If a sale’s dumping margin is less than 0.50%, it is considered minimal, and no duties will be collected. Future Cash Deposit Requirements The new cash deposit rates, which exporters must pay, will take effect for all shipments. The rate will be 11.32% for TYCSA, based on the latest findings, unless a new review occurs. Importance Notice to Importers Importers are reminded to submit certificates indicating whether they were reimbursed for duties, ensuring that they are compliant with federal regulations. This review and its conclusions are an important part of the U.S. government’s ongoing efforts to ensure that trade is fair and that domestic industries are not harmed by unfair pricing practices. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.

Continuation of Antidumping and Countervailing Duty Orders on Chinese Kitchen Appliance Shelving and Racks Estimated reading time: 3–5 minutes The United States Department of Commerce has announced the continuation of antidumping and countervailing duty orders on certain kitchen appliance shelving and racks from the People’s Republic of China. This decision is based on findings that removing these orders could lead to continued or increased dumping and unfair subsidies. It could also harm U.S. industries. The orders were originally put in place in September 2009. They aim to protect American industries from unfair competition due to dumped and subsidized imports. These orders require that extra duties be paid on Chinese kitchen racks that are sold in the U.S. at less than fair value. The government can also impose duties when the products are made using unfair subsidies. The Commerce Department and the U.S. International Trade Commission (ITC) reviewed the orders in what is called a “sunset review.” A sunset review is a routine five-year check to decide whether such orders are still needed. Both agencies concluded that removing the orders would likely lead to harm for U.S. companies that make similar products. The scope of these orders covers a variety of kitchen shelving and racks. These include shelves, baskets, and side racks made from carbon or stainless steel. They range in size and are made from wire or metal sheets of certain thicknesses. Products with glass shelving surfaces are not included. The orders are now officially continued as of April 1, 2026. U.S. Customs and Border Protection will keep collecting the required antidumping and countervailing duties for all imports of these products from China. The next review of these orders is planned to start before the five-year anniversary of this decision. Companies or individuals under an Administrative Protective Order (APO) must also return or destroy sensitive information, as required by law. This announcement was made by Scot Fullerton, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations. Legal Disclaimer This article includes content collected from the Federal Register (federalregister.gov). The content is not an official government publication. This article is for informational purposes only and does not constitute legal advice. For case-specific consultation, please contact us. Read our full Legal Disclaimer, which also includes information on translation accuracy.